Projects | Tankplasta

top of page

Our Projects

TankPlasta has a wealth of experience in designing and manufacturing custom-made plastic solutions for a wide range of industries. We are proud to have worked on a variety of projects, from small and simple to large and complex. We are committed to providing our customers with the best possible solutions, and we are always looking for new and innovative ways to meet their needs.

Here are just a few examples of our recent projects:

A large cylindrical transparent plastic bio-reactor designed for algae cultivation in aquaculture settings. The bio-reactor is 1927 mm in diameter and 2922 mm tall, with a capacity of 6 m3 and a weight of 500 kg. It is made of PETG and PP-H, and it is designed to withstand a media temperature of +20°C and atmospheric pressure.

A tall cylindrical PP scrubber designed for cleaning gas in chemical manufacturing facilities. The scrubber is 2270 mm in diameter and 5203 mm tall, with a capacity of 3680 liters and a weight of 700 kg. It is designed to withstand temperatures of 0°C to +40°C and pressures of -0.02 bar(g) to +0.02 bar(g). The scrubber is manufactured in accordance with the DVS 2205 and LST EN 12573 design standards.

A complex network of PP piping pre-assembled for gas cleaning in chemical manufacturing facilities. The piping is made of PP-H and has a diameter of 250 mm and a length of 35 meters. It is designed to withstand temperatures of 0°C to +80°C and pressures of -6 bar to +6 bar. The piping is welded using the infrared welding method.

A tall cylindrical transparent plastic storage tank designed for seaweed cultivation in aquaculture settings. The tank is 1188 mm in diameter and 2876 mm tall, with a capacity of 2 m3 and a weight of 150 kg. It is made of PETG and PP-H, and it is designed to withstand a media temperature of +20°C and atmospheric pressure.

Six cylindrical PP chemical reactors with integrated mixers and heaters, designed for processing a mix of very aggressive chemicals. The reactors are made of PP-H and are made in two sizes: 606 mm diameter and 1535 mm height with a capacity of 200 dm3, and 990 mm diameter and 1590 mm height with a capacity of 600 dm3. The reactors are designed to withstand temperatures of +15°C to +65°C and atmospheric pressure. They are manufactured in accordance with the LST EN 12573 design standard.

A network of custom-designed plastic ventilation ducts and components specifically engineered for waste recycling and composting plant environments. These ducts and components are resistant to corrosion from chemically aggressive air and steam and can withstand temperatures up to 60°C. They are manufactured in various sizes and configurations to meet project specifications.

A custom-designed PVC chemical extractor designed to handle a mix of chemicals in industrial settings. The extractor is made of PVC and measures 500 mm in diameter and 400 mm in height. It weighs 50 kg and is designed to operate at atmospheric pressure.

A large cylindrical PP-H tank with a UV protection film, designed for storing high purity water in semiconductor manufacturing facilities. The tank is 3950 mm in diameter and 4000 mm tall, with a capacity of 38.5 m3 and a weight of 1650 kg. It is designed to withstand temperatures of +5°C to +50°C and pressures of +10 mBar to +50 mBar. The tank is manufactured in accordance with the DVS 2205 and LST EN 12573 design standards.

A large cylindrical HDPE tank designed for storing deionized water in semiconductor manufacturing facilities. The tank is 2880 mm in diameter and 3890 mm tall, and it weighs 785 kg. It has a capacity of 19 m3 and is designed to withstand temperatures of +5°C to +50°C and pressures of +10 mBar to +50 mBar. The tank is manufactured in accordance with the DVS 2205 and LST EN 12573 design standards.

A network of custom-designed plastic ventilation ducts and components specifically engineered for power plant environments. These ducts and components are resistant to corrosion from chemically aggressive air and steam and can withstand temperatures up to 60°C. They are manufactured in various sizes and configurations to meet project specifications.

A collection of durable and weather-resistant wake park and snow park figures made from UV-stabilized PP-C and HDPE. The figures include boxers and kickers in various sizes and designs, customizable to project specifications. These figures are ideal for enhancing the excitement and challenge of wakeboarding and snowboarding activities.

A large cylindrical PP degasser designed for removing dissolved gases from water in treatment plants. The degasser is 25 m³ in size and is made of PP-H. It is designed to operate at a media temperature of 25°C.

A network of custom-designed HDPE plastic ventilation ducts specifically engineered for chemical factory environments. These ducts are resistant to corrosion from chemically aggressive air and can withstand temperatures up to 60°C. They are manufactured in various sizes and configurations to meet project specifications.

A network of custom-designed plastic ventilation ducts specifically engineered for swimming pool environments. These ducts are resistant to corrosion from chlorinated air and can withstand temperatures up to 30°C. They are manufactured in various sizes and configurations to meet project specifications.

A large cylindrical HDPE potassium storage tank designed for storing potassium in the chemicals industry. The tank is insulated with PE foam and has a capacity of 25 m³. It is designed to operate at a media temperature of 25°C.

A collection of custom-designed rectangular and circular plastic ducts and fittings specifically engineered for ventilation systems in galvanization industries. These ducts and fittings are resistant to corrosion from chemically aggressive air and steam and can withstand temperatures up to 60°C. They are manufactured in various sizes and configurations to meet project specifications.

A large cylindrical insulated storage tank designed for storing sodium hypochlorite (NaOCl) in the chemicals industry. The tank is made of HDPE covered with Zincalum steel and has a capacity of 25 m³. It is designed to operate at media temperatures ranging from +5 °C to +30 °C.

A large cylindrical insulated degasser designed for removing dissolved gases from water in treatment plants. The degasser is 25 m³ in size and is made of PP-H with steel covering. It is designed to operate at a media temperature of 25°C.

A cylindrical flame-resistant and electrically conductive chemical reactors designed for processing disinfectants in the chemicals industry. The reactor is made of PP S EL ATEX material and has a capacity of 1.5 m³. It is designed to operate at a media temperature of 60 °C.

Verzinkungsbad für die Metallindustrie

Branche: Metalle

Anwendung: Galvanisierungsbad

Medien im Inneren: Verschiedene Säuren

Medientemperatur: 50 °C

Produktmaterial: PPH

Maße: 1500 x 2500 x 1500

Land: Litauen

Jahr: 2018

Galvanization Bath from PP

Kondensatspeicher für Wasseraufbereitungsanlage

Branche: Wasseraufbereitung

Anwendung: Kondenswasserspeicherung

Medien im Inneren: Wasser

Medientemperatur: 70 °C

Größe: 35 m³

Produktmaterial: PPH

Land: Kasachstan

Jahr: 2018

PP plastic custom made oil storage tank

Chemikalientank der Wasseraufbereitungsanlage

Branche: Wasseraufbereitung

Anwendung: Natriumhypochlorit Lagerung

Medien im Inneren: NaClO

Medientemperatur: 20 °C

Produktmaterial: HDPE

Größe/Maße: 40 m³

Land: Weißrussland

Jahr: 2018

Natrium Hypochlorite (NaClO) Plastic Storage Tank

Kondensationslager für Abfälle Verwertungsanlage

Branche: Abfallverwertung

Anwendung: Kondensationsspeicher

Medien im Inneren: Wasser

Medientemperatur: 70 °C

Produktmaterial: PP H

Größe: 20 -30 m³

Land: Litauen

Jahr: 2019

PP plastic custom made water storage tanks for condensation

Speichertank für ultrahochreines Wasser

Branche: Pharma

Anwendung: Ultrahochreine Wasserspeicherung

Medien im Inneren: Ultrahochreines Wasser (UHPW)

Medientemperatur: 25 °C

Produktmaterial: PVDF

Größe: 2 m³

Land: Estland

Jahr: 2020

PVDF Ultra-High Purity Water Storage Tank

Rechteckige und runde Kunststoffkanäle und -fittings

Branche: Galvanisierungsindustrie

Anwendung: Lüftungssystem

Medien im Inneren: Luft mit verschiedenen Chemikalien Dampf

Medientemperatur: 40 °C

Produktmaterial: PPH, HDPE

Größe/Maße: Gemäß Projektspezifikationen

Land: Litauen

Jahr: 2020

Rectangular & Circular Plastic Ventilation Systems Made from PP and PE

PP H Chemiereaktoren für die chemische Industrie

Branche: Chemische Industrie

Anwendung: Chemische Reaktoren

Medien im Inneren: Chlorierte Chemikalien

Medientemperatur: 70 °C

Produktmaterial: PP H

Größe: 5 - 10 m³

Land: Litauen

Jahr: 2020

PP plastic custom made reactors

Flammbeständige und elektrisch leitfähige chemische Reaktoren

Branche: Chemische Industrie

Anwendung: Chemischer Reaktor/Mischer

Medien im Inneren: Desinfektionsmittel

Medientemperatur: 60 °C

Produktmaterial: PP S EL ATEX

Größe: 1,5 m³

Land: Litauen

Jahr: 2020

PP plastic reactors with heating for disinfection application

Isolierter Lagertank mit Natriumhypochlorit

Branche: Chemische Industrie

Anwendung: Natriumhypochlorit Lager

Medien im Inneren: NaOCL

Medientemperatur: +5 °C - +30 °C

Produktmaterial: HDPE mit Zinkstahl überzogen

Größe: 25 m³

Land: Litauen

Jahr: 2020

Zincalume covered and insulated custom made plastic water storage containers

Isolierter Entgaser

Branche: Wasseraufbereitungsindustrie

Anwendung: Degazer

Medien im Inneren: Wasser

Medientemperatur: 25 °C

Produktmaterial: PP H isoliert und mit Stahl überzogen

Größe: 25 m³

Land: Litauen

Jahr: 2020

Zinc covered and heated plastic degazator / degazer for water treatment plant

Kaliumlagertank für die chemische Industrie

Branche: Chemische Industrie

Anwendung: Kaliumspeicherung

Medien im Inneren: NaOH

Medientemperatur: 25 °C

Produktmaterial: HDPE isoliert mit PE-Schaum

Größe: 25 m³

Land: Litauen

Jahr: 2020

Potassium Storage (NaOH) Tank for Chemicals Industry

Lüftungskanäle aus Kunststoff für Schwimmbäder

Branche: SPAs & Schwimmbäder

Anwendung: Lüftungssysteme

Medien im Inneren: Luft mit Chlordampf

Medientemperatur: 30 °C

Produktmaterial: PPH

Größe/Maße: Gemäß Projektspezifikationen

Land: Litauen

Jahr: 2021

Plastic Ventilation Ducts for Swimming Pools

Lüftungskanäle aus Kunststoff für Schwimmbäder

Branche: Chemie

Anwendung: Lüftungssysteme

Medien im Inneren: Luft mit aggressiven chemischen Dämpfen

Medientemperatur: 30 °C

Produktmaterial: PE

Größe/Maße: Gemäß Projektspezifikationen

Land: Litauen

Jahr: 2021

PE plastic ducts and grills for ventilation systems in chemical factory

PP Degazer für Wasseraufbereitungsanlagen

Branche: Wasseraufbereitungsindustrie

Anwendung: Entgaser

Medien im Inneren: Wasser

Medientemperatur: 25 °C

Produktmaterial: PP H

Größe: 25 m³

Land: Niederlande

Jahr: 2021

custom made PP plastic degazer / degazator for industrial water treatment application

Wake Parks & Snow Parks Figuren

Branche: Freizeit

Anwendung: Boxer und Kicker für Wakeparks u Snowparks

Produktmaterial: PE und PP

Größe/Maße: Gemäß Projektspezifikationen

Land: Litauen

Jahr: 2021

Kickers and box for water parks, snow parks and wake parks

bottom of page